It's powerful hearing from people who’ve lived through the full arc of a brand. From the highs, the frustrations, and the slow realization that things aren’t quite what they used to be. You don’t need a press release or a teardown video when a seasoned truck owner spells it out in plain words, and that’s what I discovered this morning when reading through the comments of my recent article. This reply came from a reader named Bobby Owenby, and it stopped me mid-scroll. It wasn't because it didn’t just echo a concern, but it captured a sentiment that a lot of longtime GM truck owners are starting to feel.
Here’s what Bobby wrote: "I have owned approximately 30 Chevrolet/GMC pickups over the last 40 years and currently own 3: A 2006, 2017, and a 2019. I am constantly worried about the 6-speed automatic transmission in the 2 newer trucks. The ‘06 I have had since it was new and will probably keep it forever, but the other 2, I think about getting rid of all the time because of all the problems people are having. I know it's not just GM, but when are the auto manufacturers going to start building vehicles for the hard working people of America again and tell the government to take a hike! They want us to buy American, well then build something that is worth buying and not JUNK!”
What stood out to me was the feeling of unease and betrayal from someone who has clearly stood by the brand longer than most. Bobby’s 2006 still feels trustworthy to him, yet the 2017 and 2019 models, both equipped with GM’s 6-speed automatic transmission, have left him constantly on edge. And the more you dig into owner feedback across forums and Facebook groups, the more you realize he’s far from alone.
From hard shifts and torque converter failures to full-on transmission replacements under 100K miles, it’s clear that even die-hard loyalists like Bobby are losing confidence. One reader shared in a separate article that their Chevy Silverado 1500 blew through three transmissions in just 100,000 miles, eventually making them question the very brand they had trusted for decades too.
So what’s going on here? Why are so many longtime Chevy and GMC truck owners feeling like the quality isn’t what it used to be?
The Hidden Cost of Complexity
A large part of this shift in perception can be traced back to the modern pressures automakers face: stricter emissions standards, rising fuel economy demands, cost-cutting to hit quarterly goals, and the never-ending push to pack more technology into the same frame. Somewhere along the way, simplicity seems like it got sacrificed, and owners like Bobby clearly notice it.
Where older trucks like his 2006 model are often praised for their mechanical honesty and dependability, newer models are more likely to be scrutinized for software bugs, transmission logic issues, and unpredictable reliability. That growing gap is what’s fueling this wave of distrust.
Another particularly sharp example of the reliability gap came from a Silverado owner who returned their 2024 Chevy 2500 HD after just one week of ownership due to several unresolved problems. That kind of experience used to be unthinkable for a truck platform that was once synonymous with rugged reliability.
Loyalty Isn’t What It Used to Be
Bobby’s comment raises a hard truth: American truck buyers are some of the most loyal consumers in the industry, but that loyalty is earned and not just automatically given. People buy American not just for the badge, but because they want to believe they’re investing in something that reflects their values: durability, resilience, and pride in what’s built at home.
When that trust starts eroding, it’s not just a product issue, but also an identity one. And when those same buyers are being asked to keep paying premium prices while quality appears to slide, you start seeing more people speak up, just like Bobby did.
Even at the engine level, there’s reason for concern. Recent reports suggest that GM might even be replacing every L87 6.2L engine found in certain Silverado and Sierra trucks, sparking worry about long-term dependability in vehicles that were marketed as high-performance workhorses. If engine and transmission durability can no longer be taken for granted, there’s very little left to anchor the buyer’s faith.
A Culture Starting to Crack
I think what Bobby said rings especially true for a lot of older buyers who remember when trucks were simpler, tougher, and more honest. But even as someone from a younger generation, I can still understand the frustration clearly. We’ve grown up hearing that American trucks are built to last that it’s practically part of the culture. So when we see newer models struggle with basic longevity, it doesn’t just affect buyers like Bobby, but it also undermines the promise that these trucks were supposed to carry forward.
And let’s not forget, this isn’t just a GM issue. Ram, Ford, Toyota — they’ve all had their share of problems. But GM seems to be getting hit hardest in the court of public opinion lately, and that’s partially because so many of their most loyal customers feel like they’ve been left behind.
It’s no longer just about brand pride. It’s about whether a truck will actually go the distance without turning into a recurring expense. And for those of us who love trucks, that reality is more disappointing than any marketing campaign can fix.
Takeaways for Buyers and Automakers
- Decades of loyalty shouldn’t be met with doubt. If someone like Bobby, who’s bought 30 GM trucks, starts to feel uneasy about his newer vehicles, it’s a clear sign the brand has strayed from its foundation.
- Transparency and consistency matter. Automakers need to address the known transmission and engine concerns head-on, not just through service bulletins, but through meaningful updates and communication.
- Old-school simplicity still holds value. There’s a reason so many owners are clinging to their 2000s-era trucks. They work. They last. And they’re not overloaded with systems that fail before 100K miles.
- Buy American shouldn’t mean compromise. American truck buyers want to support homegrown brands, but they need a product that earns that trust, and not one that takes it for granted.
What Do You Think?
Have you owned an older truck from the 2000s or earlier and noticed a difference in reliability compared to recent models?
And are you someone who still believes in buying American, but now finding yourself second-guessing that decision after these kinds of stories?
Let us know of your honest opinions in the comments below. We want to hear what the public perception really is regarding these trucks.
Aram Krajekian is a young automotive journalist bringing a fresh perspective to his coverage of the evolving automotive landscape. Follow Aram on X and LinkedIn for daily news coverage about cars.
Image Sources: Chevrolet and GMC Galleries, respectively.
Comments
With all the new…
Permalink
With all the new technologies and assist nannys in new vehicles, I seriously doubt reliability and longevity of the past will ever return.
Vehicles have always had some type of issues, but with the complexity of their designs now, few owners can deal with themselves.
As mentioned this is an industry wide situation so it’s hard to get away from.
Over the last 45+ years of my own vehicle ownerships I too have had no less than 30+ vehicles, and see this first hand. Many were brand new, now I just look for solid used that have hopefully had the initial problems solved.
I owned an 85 S10, a 92…
Permalink
I owned an 85 S10, a 92 pickup, a 2001 Silverado, which was the best ever. Then I bought a 2011 GMC Sierra SLT. Loved the truck but the frame rusted out. I now have a 2024 Silverado rst. I spent $3000 to rust proof it. So far I love the truck. I ended up spending $8000 repair the GMC and my son has it now. I wasn't happy
Had a 2005 GMC great riding…
Permalink
Had a 2005 GMC great riding for a 1500 truck. Reliable 4 speed automatic.loved the seats, real comfort. Traded for a 2014 Chevy. I wish that I had the 2005. Crappy ride quality due to their cheep coil over suspension. Crappy 6 speed failed at 120000 miles. I performed PM at 100000 that was a waste. the seats are hard lack comfort for long trips. The GMC was easy to change front bulbs,.the 2014 I requires removing components. Only good thing the 2014 has, is more power with the direct fuel injection maybe it's time to look at a Tundra.
About a truck a year. Good…
Permalink
About a truck a year. Good investment in keeping junk yards fully stocked
About a truck a year. Good…
Permalink
About a truck a year. Good investment in keeping junk yards fully stocked
Most people want a vehicle…
Permalink
Most people want a vehicle that starts, runs, and stops when they want and need it to. Why is that underlying concept so difficult for manufacturers.
Two things will fix this. 1…
Permalink
Two things will fix this. 1 quit building trucks for soccer mommies and male panzies. Build a truck as a truck again. Quit worrying about tech and ride quality. 2 Get the government out of work vehicles. If you actually work a truck, you need a large engine that makes big low rpm range torque numbers that will provide ample low end grunt as well as a rock solid transmission ( GM 480LE or Allison). I do not need the small percentage gain in mileage of cylinder deactivation or 6 plus speeds of weak knee transmissions. Most would willingly pay more for fuel and have a bulletproof work vehicles.
This is precisely the reason…
Permalink
This is precisely the reason I hold on to my 2000 Silverado 1500. It currently has 582,000 miles. Several thousand of those towing travel trailers over the mountains of California Nevada and Oregon.
I can fix anything on the vehicle and have done the maintenance almost exclusively myself for the last 460,000 miles.
I wouldn’t trust a new pickup with 100, 000 miles as much as I trust my Silverado. I get the whole CAFE and emissions thing, but the bottom line for me is “will it leave me stranded in the boonies with no cell reception”.
I've owns between 15-20…
Permalink
I've owns between 15-20 Chevy's and Fords and currently have a 2016 High Country Duramax. It has 54,000 miles and still runs great. Buy there is the recurring uneasy feeling I have because of the fuel pump issue where it could basically blow up and cost me $10,000k to fix. I know there is a recall on this issue if it happens but a man should not have to worry about this happening when he could be a 1000 miles away from home. Sadly, the Toyota trucks are so much better and probably has to do with the Big Three unions. They have not built a dependable vehicle in years. Japanese vehicles are superior all the way around. Sad, but true.
I've owned 1 Tahoe and 3…
Permalink
In reply to I've owns between 15-20… by Steve (not verified)
I've owned 1 Tahoe and 3 suburbans, I own a black car service and EVERYONE that drives GM sun's say the same thing! Your lucky if you make it to 30k miles with no issues, but if you do that's it! Expect ANYgm suv to have multiple serious issues at 30k miles! I don't know what's worse the suspension or transmission! I have a 2024 suburban premier and the master cylinder went made at 11k miles down for almost 3 months, I lost clients and money! GM should be ashamed, but NONE of the parts are American made so I'm not surprised. Most drivers I know are moving on to the Lincoln Navigator, we don't have any choice! American made used to stand for something, not any more.
Same story with me ! I feel…
Permalink
Same story with me ! I feel that they have taken the true quality out of gm transmissions completely! 2010 Chevy Silverado. Three transmissions. 2017 Chevy Cruze, 78,000 miles, transmission is junk. I had been a Chevy MAN all my life I'm 65 years old. But I have never been so disgusted with Chevy as I currently am.
I stopped buying American…
Permalink
I stopped buying American vehicles years ago when it became apparent there were poorly engineered. The answer is simple ' stop buying their junk.
I have a 2014 Chevy…
Permalink
I have a 2014 Chevy Silverado that I purchased with 98k on it and at 120k I had to put a new transmission in it. I am worried about it failing again. I have 174k on it now and it feels like it may happen again. This should definitely be a recall. I feel what Bobby is thinking about the lack of durability and dependability of the newer trucks. I had a 1999 Silverado and I ran that truck to 227k before any issues other than an intake manifold gasket and the ABS pump. For what you pay for new trucks you should have some assurance and confidence that they are going last! I have always been a big GM guy! For my next purchase, I will be looking closer at reviews and forums. I did have a Toyota T-100 years back, which had no issues other than towing capacity. Maybe I will look at the Toyota Tundra next time. However, I hope GM can address the issues they are having with the transmissions. Again, there should be a recall on these! Brett
I agree 100%, I have a 08…
Permalink
I agree 100%, I have a 08 2500hd 6.0 6 speed granny 118000 miles the transmission worries me that it's going to leave me on the side of the road while pulling my 5th wheel, if gm is going to pu HD on the truck then it needs to be built heavy duty. There needs to be more options then one gear ratio 3:73, I feel the 4:11 would be more suitable for pulling vs 3:73. I am very impressed with the 6.0, if gm would put turbos on the gas engines then they would might deserve the HD.
Planned obsolescence,…
Permalink
Planned obsolescence, happened back in the seventies, chevy bodies rusted like crazy. I had a 73 check 3 quarter ton, the rear fender wells fell off inside the box. 350 v8 great engines, transmission so so. People slowed way down on purchases of chevy trucks. 1988 new design, I bought an 89 chevy, half ton, V6 motor, my first 4x4 truck. Probably one of the best vehicles I have ever owned. The body did not rust. Special treatment, on the quarter panels and rocker panels. Have an 03 Sierra 3 quarter HD, strong diesel engine (hard to find good service, dealerships wont touch it, too old), very good allison transmission. But the body is ridden with rust. I almost dont like talking about the mechanicals, for fear of jinxing it. Yup, bring back simplicity and durability. Complex gadgets are a side light of WOKE culture.
I totally agree with the man…
Permalink
I totally agree with the man about gm/ Chevy trust issues,I have had a 2002 Silverado,2007 Silverado,2016 Silverado,and also 2023 Tahoe RST fully loaded,The 2002and the 2007 trucks are steal going strong,but at 94000 miles, I had to put remanufactured transmission in the 2016, keep in mind ,the truck has never pulled a trailer and if you saw the truck, you would think it's less than 5 years old! I will no longer buy gm product,also bought 125000 mile bumper to bumper on 2023 and will definitely sell before that runs out!! Gm /Chevy has no loyalty anymore and doesn't build quality! By the way 2016 was also a 6 speed, costing over $6500 to replace, Buckey Summerlin
Great writing in this…
Permalink
Great writing in this article. While I am more of a car guy than a truck guy, I gave in and bought the redesigned 2022 GMC Sierra 1500. My first full size truck. Having towing needs that no SUV on the market could fulfill, drove me towards the full size truck option. After carefull review I settled on the GMC. Great looks - inside and out, very car-like handling for a truck, and the awesome 3.0l baby Duramax.
All that being said, I am not enthused with my purchase after three years. I have endured a host of quality issues and recalls. The truck has been to the dealer for repairs on average every 6-months over those three years. I even had to have leaf springs replaced...on a truck with less than 15,000 miles?
I have been a German vehicle driver my entire adult life. The decrease in quality after stepping into an American vehicle is blatantly apparent. Given the almost $65k I paid for the truck, I expected more. I have so little faith in the truck's components and their longevity that I recently bought GM's extended warranty just to insulate myself from what I know will be future significant expenses. The old feelings of Buy American will be meaningless if the current quality trends continue.
It is called "Planned…
Permalink
It is called "Planned Obsolescence" A basic junior high civics class taught this concept in the early 1980's. If you make products that will not last, consumers MUST replace the broken or broken down items. Sad and sickening in this day and age, but as long as the elite rich are in control things are not ever going to change for the "common" citizen. The rich are only concerned with how to get more money, not with how to help make lives better for everyone.
Well okay I have a 1999…
Permalink
Well okay I have a 1999 Chevy suburban 4x4 and I bought it because it newer than what I usually buy but it was my first suburban and I really do love it it has 233,000 miles I am getting it worked on ball joints and pitman idler are axle U-bolts replaced but I will never get a new one this is my favorite behind my Monte Carlo 1970 .
Well, as an employee of a…
Permalink
Well, as an employee of a rental car company I can, with absolute certainty, say that they're all building crap. Toyota, Ford, GM, especially Stellantis (looking directly at you, Jeep), the Germans, you name it, we see recalls and repairs all the time. Wait til the Covid-era vehicles really get some age and miles on them
I have owned a 98 Chevy…
Permalink
I have owned a 98 Chevy Silverado half ton gas, 5.0 litre, perfect truck. At 185,000 still perfectly running and traded it in on 2011 Silverado 2500 4x4 6.0 gas... Again excellent truck, only replaced exhaust manifolds at 115,000 miles. At 160,000 traded it in on a 2024 Chevy Silverado 2500 LT 6.6 gas..at 16,000 miles it has been a perfect truck, pulling heavy loads no problem. It has even recorded 20 mpg on a 100 mile highway run, of course, not pulling a trailer....It has truly amazed me.
I too have only owned chevy…
Permalink
I too have only owned chevy. From my 71 K5 blazer to 2004 has483thousand miles 2010 has 256 thousand miles, both are 2500hd 4x4 6.0 engines.
And yes I have seen the difference just in the latter 2. My 04 is still running smoothly.
My 2010 two TCM modules .
And BCM modules. Replacement parts from Dealer. Each lasted 5 years.
And I decided not to buy chevy again. Especially with the 4 cylinder turbomax
I just see that as a complete fail for a full size truck.
2002 Tacoma 4 Dr 4x4 TRD…
Permalink
2002 Tacoma 4 Dr 4x4 TRD. 197.000 miles.made in usa.not Mexico. Kiss keep it simple stupid. After 23 years had to replace plastic radiator.did that my self.170dollars Amazon denco ome.new trucks built cheap cost to. Much. Old working man.
I have a 1990 GMC Sierra…
Permalink
In reply to 2002 Tacoma 4 Dr 4x4 TRD… by Aaron watts (not verified)
I have a 1990 GMC Sierra k1500, 5 speed, 4x4. It has almost 350,000 miles on it. It's not a "looker," yet it till passes CA smog. I know eventually, I'll have to rebuild engine and tran, but for now I trust it to take me anywhere I need to go. The downside is MPG. LOL
The night my dream of a new…
Permalink
The night my dream of a new re-creation of trucks as they were prior to 2000 that owners could 'shade tree mechanic' arriving soon at dealerships everywhere but available only in a shiny Khaki Brown which ended with happy buyers gleefully spray painting in the desired colors that woke me was my mental solution for what GMC and other brands need to do: 'get back to basics!'
Our 2022 Sierra 1500 AT4 V8 L87 that we bought in June of 2024 with under 14000 miles on it is part of GMs recall is one that we would never have purchased had we known of the issues related to it and all vehicles manufactured since 2007. If you go to topclassactions.com and their search bar, key in GM and read the replies section of each class action beginning with the one for loss of propulsion initiated by Powell.
We have a 2007 Nissan Frontier manual 4WD with over 160,000 miles on it regularly maintained but my husband has too much back pain to drive it beyond 2 hours and when we need to drive that long, I drive it but he really likes to drive too! We thought the Sierra was a bargain at $36K because it's 'fully loaded' and 'like new' and now we truly regret the purchase! We found many things 'not right' for example, we tried several times on long stretches of back roads to reach 140 mph. and the most it will go is 107, makes a 'lugging sound' then goes to 80. A few weeks into ownership and we were searching online and found keeping it in L9 is best to prevent lifter damage. The dealer says it has a 'governor' on it to prevent driving the max 140 mph. I call this fraud, plain and simple! Neither of us has ever purchased a vehicle unable to clock the highest speed on the speedometer! Also, the parking brake is in the form of a button and it is electronics dependent which means in an emergency if the foot brake fails and electronics fails, there is no mechanical emergency brake to pull to save us and in the past, when we lived in Reno, NV driving Donner Pass and other steep areas my husband who drove HAZMAT big rigs pointed out where the brake stop off ramps were as we drove explaining that option long before we ever purchased the GMC Sierra here in Texas.
Ideally the truck we and likely many more consumers want is one that is not encumbered by the obvious complications of electronics, functional obsolescence (too many things to list that fail often & require dependence on dealer mechanics or 'authorized mechanics' that owners should be able to do themselves)
In closing, how does one go about starting an auto company so we can get those Khaki Brown trucks I dreamed of?😂
Currently have 2 gmc trucks,…
Permalink
Currently have 2 gmc trucks, 2003 2500HD 6.0 4x4 160k and a 2004 1500 4.3 2wd 240k both have been great workhorses with few problems other that preventative maintenance. Plan to hang on to them as long as possible
Even 20 years ago most…
Permalink
Even 20 years ago most American cars were unreliable. Unless it's toyota reliability, I don't consider it worth attention, or my money
I have a 2013 GMC Sierra…
Permalink
I have a 2013 GMC Sierra 1500 4wd. Have 134,000 miles on it. Have hauled at least 75 cords of fuel wood, couple of loads of gravel a year, 15 ski trips a year, etc. Have used low range a number of times to skid logs.
Only problem was replacing the traction control solenoid at 74K miles. Change my own oil - think it is good for 200K.
My first truck was a1979 …
Permalink
My first truck was a1979 Chevy K10 Scottsdale, 350 sb and a turbo 400 transmission 4” frame lift and 3” body lift on 37” Monster Muder Tires. That was a truck that you could work on. Traded for an 89’ Dodge Dakota sport 4x4 that summer I bought an 74’ Chevy Custom Deluxe K 20 w/ 350 sb and turbo 400 transmission for $300.00 took is to the county fair truck pull the next day hooked to the sled moved the sled 20’ but didn’t break anything Owned that truck for 28 year’s sold it to my nephew for $2000.00 he still owns it. (9 years) that truck is 51 years old. Traded the Dakota for a 91 Chevy Lumina bought a 92’ Chevy 1500 WT it ran for 128k needed rings and valves sold it private sale bought a 93’ s-10 blazer traded for 95’ Tahoe traded for 96’ used Grand Prix traded for 97’ Caravan bought a 2002 Chevy W/T to replace the 92’ Chevy W/T traded for a 2004 GMC Serria 2500 HD ran it for 228k two transmissions needed throttle body work didn’t want to spend anymore money on that truck currently driving a 2015 GMC sierra 2500 HD standard cab 8’ bed 6.0 L 245k on third transmission and third set of tires ( Hankook atm and at2 goal is 85k on this set 10k to go) so in short make trucks for the working man. Quit making them so the doctors and lawyers who drive there BMW , Audi, Porsche to work can feel comfortable in a truck when they go hunting or fishing….. trucks are truck no luxury cars.
I own a 2006 Gmc 2500 with…
Permalink
I own a 2006 Gmc 2500 with 200k on it. Oil changes and wearing items such as brakes, belts and hoses are all I have had to do. It is as reliable as the day it was purchased in 06. The newer truck is a 2020 Canyon with 70k. It runs well, but I've had issues with software glitches make the dash lights for the climate control go out. The lighter plug quit working, and now the ignition key tumbler won't release the key. $900 at the dealership to fix the lights and I haven't had the ignition looked at yet. They also charge a $169. Diagnostic fee to tell you what's wrong whether they fix it or not. On top of all that, the have discontinued the long bed on the mid size truck. That alone will have me looking at a Toyota Tacoma again.
Pagination