Skip to main content

I’ve Owned 30 Chevrolet and GMC Trucks in the Last 40 Years, But If They Want Us to Keep Buying American, They Need to Bring Back Real Quality

There’s a difference between loving a brand and trusting it, and some lifelong GM truck owners are starting to realize that one doesn’t always guarantee the other.
Posted:
Author: Aram Krajekian
Advertising

Advertising

It's powerful hearing from people who’ve lived through the full arc of a brand. From the highs, the frustrations, and the slow realization that things aren’t quite what they used to be. You don’t need a press release or a teardown video when a seasoned truck owner spells it out in plain words, and that’s what I discovered this morning when reading through the comments of my recent article. This reply came from a reader named Bobby Owenby, and it stopped me mid-scroll. It wasn't because it didn’t just echo a concern, but it captured a sentiment that a lot of longtime GM truck owners are starting to feel.

Here’s what Bobby wrote: "I have owned approximately 30 Chevrolet/GMC pickups over the last 40 years and currently own 3: A 2006, 2017, and a 2019. I am constantly worried about the 6-speed automatic transmission in the 2 newer trucks. The ‘06 I have had since it was new and will probably keep it forever, but the other 2, I think about getting rid of all the time because of all the problems people are having. I know it's not just GM, but when are the auto manufacturers going to start building vehicles for the hard working people of America again and tell the government to take a hike! They want us to buy American, well then build something that is worth buying and not JUNK!”

What stood out to me was the feeling of unease and betrayal from someone who has clearly stood by the brand longer than most. Bobby’s 2006 still feels trustworthy to him, yet the 2017 and 2019 models, both equipped with GM’s 6-speed automatic transmission, have left him constantly on edge. And the more you dig into owner feedback across forums and Facebook groups, the more you realize he’s far from alone.

From hard shifts and torque converter failures to full-on transmission replacements under 100K miles, it’s clear that even die-hard loyalists like Bobby are losing confidence. One reader shared in a separate article that their Chevy Silverado 1500 blew through three transmissions in just 100,000 miles, eventually making them question the very brand they had trusted for decades too.

So what’s going on here? Why are so many longtime Chevy and GMC truck owners feeling like the quality isn’t what it used to be?

2025 GMC Sierra

The Hidden Cost of Complexity

A large part of this shift in perception can be traced back to the modern pressures automakers face: stricter emissions standards, rising fuel economy demands, cost-cutting to hit quarterly goals, and the never-ending push to pack more technology into the same frame. Somewhere along the way, simplicity seems like it got sacrificed, and owners like Bobby clearly notice it.

Where older trucks like his 2006 model are often praised for their mechanical honesty and dependability, newer models are more likely to be scrutinized for software bugs, transmission logic issues, and unpredictable reliability. That growing gap is what’s fueling this wave of distrust.

Another particularly sharp example of the reliability gap came from a Silverado owner who returned their 2024 Chevy 2500 HD after just one week of ownership due to several unresolved problems. That kind of experience used to be unthinkable for a truck platform that was once synonymous with rugged reliability.

Loyalty Isn’t What It Used to Be

Bobby’s comment raises a hard truth: American truck buyers are some of the most loyal consumers in the industry, but that loyalty is earned and not just automatically given. People buy American not just for the badge, but because they want to believe they’re investing in something that reflects their values: durability, resilience, and pride in what’s built at home.

Advertising


When that trust starts eroding, it’s not just a product issue, but also an identity one. And when those same buyers are being asked to keep paying premium prices while quality appears to slide, you start seeing more people speak up, just like Bobby did.

Even at the engine level, there’s reason for concern. Recent reports suggest that GM might even be replacing every L87 6.2L engine found in certain Silverado and Sierra trucks, sparking worry about long-term dependability in vehicles that were marketed as high-performance workhorses. If engine and transmission durability can no longer be taken for granted, there’s very little left to anchor the buyer’s faith.

A Culture Starting to Crack

I think what Bobby said rings especially true for a lot of older buyers who remember when trucks were simpler, tougher, and more honest. But even as someone from a younger generation, I can still understand the frustration clearly. We’ve grown up hearing that American trucks are built to last that it’s practically part of the culture. So when we see newer models struggle with basic longevity, it doesn’t just affect buyers like Bobby, but it also undermines the promise that these trucks were supposed to carry forward.

And let’s not forget, this isn’t just a GM issue. Ram, Ford, Toyota — they’ve all had their share of problems. But GM seems to be getting hit hardest in the court of public opinion lately, and that’s partially because so many of their most loyal customers feel like they’ve been left behind.

It’s no longer just about brand pride. It’s about whether a truck will actually go the distance without turning into a recurring expense. And for those of us who love trucks, that reality is more disappointing than any marketing campaign can fix.

Takeaways for Buyers and Automakers

  • Decades of loyalty shouldn’t be met with doubt. If someone like Bobby, who’s bought 30 GM trucks, starts to feel uneasy about his newer vehicles, it’s a clear sign the brand has strayed from its foundation.
  • Transparency and consistency matter. Automakers need to address the known transmission and engine concerns head-on, not just through service bulletins, but through meaningful updates and communication.
  • Old-school simplicity still holds value. There’s a reason so many owners are clinging to their 2000s-era trucks. They work. They last. And they’re not overloaded with systems that fail before 100K miles.
  • Buy American shouldn’t mean compromise. American truck buyers want to support homegrown brands, but they need a product that earns that trust, and not one that takes it for granted.

What Do You Think?

Have you owned an older truck from the 2000s or earlier and noticed a difference in reliability compared to recent models?

And are you someone who still believes in buying American, but now finding yourself second-guessing that decision after these kinds of stories? 

Let us know of your honest opinions in the comments below. We want to hear what the public perception really is regarding these trucks. 

Aram Krajekian is a young automotive journalist bringing a fresh perspective to his coverage of the evolving automotive landscape. Follow Aram on X and LinkedIn for daily news coverage about cars.

Image Sources: Chevrolet and GMC Galleries, respectively.

Advertising

Comments

Tom cramer (not verified)    June 11, 2025 - 9:09PM

Everything has gotten so complicated and technical and cheaply build American or foreign but highly priced today’s young people don’t know how to work without a cell phone is there hand this country needs to go back 30 years and start over

Skip214 (not verified)    June 11, 2025 - 9:18PM

Quit taking your truck to the dealer for transmission and lifter failures. Dealers Give you a repair that will fail again. Find the independent that will reprogram the transmission to not lock up until high-speed. They will probably be able to shut off the stupid AFM. If you have failed lifters Have a independent install the new cam with delete kit.


Advertising


DK (not verified)    June 11, 2025 - 9:23PM

Bougght a new 2020 GMC AT4 with diesal and loved it for 6,000 miles. At 6067 miles is when it all went downhill. It broke down 3x's on 3 major trips and GMC did not reimburse me for one single expense; over $2,500 in rentals, hotels, time and materials. I have owned 5 GM trucks in 25 years and typically run them for 200K mileage before handing them down to my boys. GM quality is horrible these days and the write is correct, if they want me to buy American, then build better quality trucks. I own my first Tundra and I'm 80K mileage into it and not one breakdown yet. As for my AT4, I got it recalled under my state recall program and gave the truck to me son. So far, it's only needed nee valve lifters after 20K mileage. Just another reason not to buy American.

Reid Burlingham (not verified)    June 11, 2025 - 9:36PM

Bought my first luxury Cadillac and it was a lemon. It was bought back after hiring a lawyer. I fought the quality issues for 8 months and said enough. GM quality and reliability is lacking putting the company in disparate situations like the truck recall. Such a shame that shareholders are put above quality and reliability isn’t it?

I now own a Lexus as a result! Enough said?

Erle L Fowler (not verified)    June 11, 2025 - 9:50PM

I own 4 Chevys. 05 3/4 ton Suburban
4x4 w/8.1 less than 100k miles. 05 Tahoe LT w/189k miles. 2018 1/2 ton w/246k miles and 18 C3500 dually (gas) w/20,000 miles. Don't plan on owning the 18 1/2 ton too much longer. Spent over 10k dollars in the last year on repairs. It not too dependable but drive it daily. Like the gas mileage due to the 6 cyl (4.3) but......... Both 05's won't be sold ever. Will see how the dually will hold up but with 20,000 miles, might last a long while. Not sure how much longer I can tolerate Chevys lack of quality.Thats the reason I'm keeping my 05's

Mackintire (not verified)    June 11, 2025 - 9:52PM

Sonnax, a manufacturer of transmission repair kits explains in detail what the typical failures are and why they occur for nearly all of the transmissions that they have kits for. Their explanations are writren for the repair tech or mechanic. With the 6 and 8 speed GM transmissions GM engineering decided to make part of the shift regulation relatively "low pressure". Due to that ONE change, the transmission is more sensitive to control valve wear out and hydro-contamination (water absorbed into the transmission fluid). A transmission shop can make all of the required corrections, but it's likely to run you over a grand, closer to 2 grand if the torque converter needs replaced. And you ll still likely have to change the transmission fluid every 30-40k miles, if you want the transmission to shift as it should. GM offers this service for $460 for the 8 speed. Just repairing the transmission following sonnax's instructions would likely please most customers. GM doing that would likely be akin to admitting making a mistake and open themselves to future lawsuits.

Derrick B (not verified)    June 14, 2025 - 2:08AM

In reply to by Mackintire (not verified)

I've had GM's all my life, cars and trucks. Currently have a 21 Silverado 6 2. Had lifter failure at 42k, water pump failure T 50. Also have an impala ltz with a 3 6 that the timing chain needs replaced at 100k. I'm done with GM. They dont stand by what they sell. Should've been did a lifter recall, and the only reason they did the engine recall is because of the government and law suits.

Matt (not verified)    June 11, 2025 - 9:54PM

2024 GMC Canyon AT4X owner here. In 5000 miles, I've had the head unit replaced, climate control unit die (waiting on that part to come in still), and several trips to the dealer for transmission or brake gremlins that they can never seem to reproduce when they have the vehicle. Jolting, shimmying forward suddenly while coming to a stop, and jerky power delivery that drops out randomly while the accelerator is pressed. Even when things are working right, the transmission programming and throttle response are absolute garbage. I'm over it. Going to find a used beater truck for truck stuff and get a manual fun car to daily.

Chris Morgan (not verified)    June 11, 2025 - 10:03PM

Just like the man in this story, ive owned dozens of gm trucks. Im particular to the gmc version. I've had the older 6.2 diesels, 6.5 turbo diesel, 350s and 454 engines. My current favorite is my 05 2500hd with the 8.1 and the allison 5 speed. It is the best set up I've ever owned in a truck. I was never happy with the 6.0 trucks. Always seemed powerless and always worried about the transmissions. But the 8.1 with the allison is my goto for pulling anything without worry. 240k miles and its never been apart or broken down. I really want to buy a new truck. And every time I look at the new gm trucks, I just get the feeling of nothing but anxiety over the price and possible issues. I've never seen a gm truck go more then 5 years without rust holes in the rockers and cab corners. I would buy a aluminum gm truck with a larger gas engine the day it hit the dealership. I have thought about a Ford with the 7.3 gas engine and the aluminum body. My brother loves his. But I'm still holding out hope that gm with eventually come around to making a truck that will last and tow like its the mission it was built for.

Jay Sims (not verified)    June 11, 2025 - 10:09PM

I owned a 2001 Chevy Tahoe. Bought it when it was 6 years old and kept it for another 9 years. Great vehicle. I have a neighbor who has a 2017 Yukon Denali and I wouldn’t give you $5 for it. Quality, refinement, and fit and finish are pitiful. And it’s been in the shop a lot. GM missed the boat. I’ll never own another GM. I now drive a Kia Sorento and am very impressed.

PickesAwesome (not verified)    June 11, 2025 - 10:15PM

Why would you want trucks in the first place? They’re ugly and get horrible gas mileage. And they’re super dangerous. Easily the worst type of vehicle in existence.

Frank Russell (not verified)    June 11, 2025 - 10:21PM

Sadly this is true. I've been a Ford guy my whole life. I wouldn't buy a new Ford though. Or a Chevy or a Ram or a Toyota. All the regulations have destroyed the reliability of all of the new vehicles. I just purchased a 2009 Toyota Sequoia with 237k miles on it. It runs like new and has been serviced at Toyota its whole life. I'm currently on a 3k road trip with my family in it. There's no way in hell I'd attempt this in an American made truck or suv unless it was a coyote v8 or a diesel. It's disgusting, we pay so much and get so little in return for reliability. Makes me sick.

Jabird (not verified)    June 11, 2025 - 10:29PM

The truck market is no longer for work. It's for soccer moms and executives. Born and raised a Chevy man, but there's no way I would want to buy a new truck at almost 50 years old, no matter what brand.

I don't need a big computer screen, 4 doors or self-driving. I need a basic hauler for light duty hauling. The place s10 and El Camino use to dominate.

No matter Houses, cars, and everything else is this world is designed for families so they can raise the price. Corporate mindset iis to make and price everything for a family and make poor, single, and/or working people to have to spend the same amount as families. We are not asking for what they are selling but we buy anyway, because we don't have a choice.

Jeffrey Peterson (not verified)    June 11, 2025 - 11:17PM

I got a 2001 Silverado with 400,000 miles on it still runs like a champ had transmission problems at 200,000 fix that never had a problem since decided it's time for a new one about a 2019 Silverado nothing but problems transmission problems before 60,000 miles in and out of the shop for software problems I'd rather drive my older truck

Steve Horne (not verified)    June 12, 2025 - 12:13AM

Modern trucks are much more complicated than they were 20 years ago. They are as much computer as they are truck. I crossed my fingers and bought a new Colorado in 2024. With 15,000 miles we have had zero problems. And we pull a 4,000 lb trailer. I hope I'm singing this same tune 6 or 8 years from now.

Edward Ballard (not verified)    June 12, 2025 - 12:28AM

I recently had to replace my truck due to a red light runner. Hit mid cab deployed all air bags the impact was that strong. Totaled both vehicle. I shopped GM, Ram, Ford, Toyota looking to replace the truck I loved so much. No matter who I looked at the feeling of a long lasting truck was not present. I have friends that have new GM trucks 2 had to replace the transmission, 1 the engine all under warranty. All were in the shop for more than a month as the dealers were all backed up with other trucks with same issue or replacements not avalible.
It's not just GM, it's all of them. 10 and 9 speed transmissions valve body issues. Engine issues GM, Ford, Ram, Toyota depending on the engine as to the failure you get to look forward to. We all know why. The lowest bidder gets to make the part and quality is not in the equation.
I just could not bring myself to spend that kind of money on a vehicle I would lay awake at night wondering what the failure would be in my vehicle.

What did I purchase you are asking? I have listed all 4 truck builders still building full size trucks.

My last Nissan Titan was a 2017. 155,000 miles on the odometer and still ran like new, only issue I ever had was the battery would only last 18 months. The Nissan before that 355,000 miles on the odometer no issues, except the battery would only last 18 month. I sold it to buy the 2017 and it is still on the road with 476,000 miles and makes a trip from Phoenix Arizona to LA California every month.
I tried to buy GM, just could'nt do it. I left Ford years ago and Dodge even longer than that.
So I purchase another Nissan Titan Platnum Reserve 4X4 knowing they stopped producing them in the summer of 2024. Knowing there will come a time parts will not be availble for such things as trim parts. I also know it has a power train that has proven to me by experiance it will run trouble free for a very long time as the last two did.
I tried, I really did, for me to purchase a truck that is no longer in production should tell GM how the public really feels about the quality issues. Hopefully someday they will listen.

Get real! (not verified)    June 12, 2025 - 2:00AM

It would be a good start if they'd just eliminate all the electronic crap. When I want a car or truck I don't want a computer that comes with a back seat driver telling me how and where I should be driving and in some cases taking control of the car away from me. I'd take just about any car made in the 60's or 70's to any of the junk they're making today. I'll probably never buy a new car, I'll buy older any day of the week.

Michael Griffith (not verified)    June 12, 2025 - 4:41AM

Been watching the decline in reliability for decades, from the perspective of an ASE certified master technician in the business since 1990. Especially from General Motors. I'm a ford guy, but no way I'll buy an Ecoboost, it's simply more complication than is practical when weighted against reliability. The only reliable work trucks are not from ANY current manufacturer, but through a time machine, requiring those of us living in the rust belt to search diligently to find vehicles that are at this point a generation or more older, and still rust free.

Deng Li (not verified)    June 12, 2025 - 5:02AM

Statistically, GM still builds the most reliable trucks on Earth. The problem is GM owners expect their trucks to last beyond 300,000 miles without a major repair. That was fine when GM trucks were simple but all the electronics and electrical parts required to meet government fuel economy regulations aren't as durable as the mechanical parts they replace. This is an issue for every brand but the expectations for reliability are highest for GM.

James PHILLIPS (not verified)    June 12, 2025 - 5:05AM

I've owned 72 74 79 87 90 92 chevy trucks and I would not buy 2020 on up because the reliability problems.
I'm presently referbing a 2016. GM has too many gadgets. In too many transmissions that are not reliable I'll stick with my 700 R.

Matthew J Schweitzer (not verified)    June 12, 2025 - 5:24AM

I owned them all over the last 40 years Chevy, Dodge GMC, Ford. I got tired of working to pay for the repairs on my trucks. I had enough and bought a Toyota Tundra with the 5.7, 4 wheel drive. Sr5. It has everything I ever wanted in a truck. I paid for the lifetime powertrain and engine warranty. Now that I'm pushing 300k with zero issues other than routine maintenance, I will drive this truck until it does or I die. Talk about a reliable truck, 85% built here in San Antonio Texas. It's to bad American trucks can't be built with the same quality as the foreign trucks.

Jeremiah smith (not verified)    June 12, 2025 - 6:25AM

I have first hand grown up with a 67 Chevy k3500 that my dad and I both poured endless hours into building a frame up restoration I was 13 at ythe time truck was completed then I bought my 99 Silverado and owned that truck for many many years growing up great piece of machinery with a 5.3 vortex second gen and currently own a 24 Silverado 2500hd high country first brand new truck ever and it’s a damn nightmare check engine first came on before I hit 3,000 mi and has been in shop as much as it’s on the road I think with repeated problems huge cost paid cash thought this would be last truck I ever buy definatly not looking that way my 99 got to 345,000 mi no major breakdowns at all that’s a damn good run and I worked it hard till the trans finally gave out then sold it my 24 has cost me more in repairs not covered by warranty’s then my 99 cost from the day I bought it and the 24 only has 60k on it so far I’m trading that truck for an older model at this point I’m embarrassed about how often it’s in the shop and I’m in a loaner

Jeffrey Behan (not verified)    June 12, 2025 - 6:45AM

I had an 2011 Chevy Silverado with 356,000 miles on it,sold it because the original transmission was starting to go and about 12 different sensors went out,I had to replace all the lifters at about 100,000 miles because of constant ticking and failure of two of them,had to replace the wiring harness to both headlights at about 60,000 miles because of overheating and failure, repaired the ABS system three times at different mileage,was it annoying? Yes, it was but overall it was a great truck and gave me a lot of great miles and hard work.The fenders wells and rockers started rusting out at the 300,000 mile range,I live in NY where they heavily salt the roads in winter so I took care of washing the truck regularly in winter to help slow down the rust issues,overall I was very happy with the truck but with all the engine and transmission and rust issues with the newer Chevy’s I might have to rethink buying a newer one now.It’s a shame as I have owned Chevy’s since 1970 and have always had good luck with them lasting without any major issues,My 2004 Chevy Colorado lasted to almost 500,000 miles with no issues but rust from the roads here in NY finally finished it off.

Dupin (not verified)    June 12, 2025 - 7:17AM

I wouldn't have anything after 2005-06 either. The government and their idea 💡 of epa is bogus. Just like going all aluminum increases mpg false 90s trucks can exceed same mpg with aftermarket parts. Less sensors and less electronics. Less epa egr b.s. stop selling 3 grades of gas ⛽️ sale only the premium 93oct. And the payments are house payments on something that retains no value. Also designed it to all be dealer repair only after 2010. Not only that they want that GPS on you for other reasons then for your maps navigation on screen. 400+hp V8s should be getting 30-40mpg by now, diesels fuel should be cheap like it used to be and exceed 30mpg. Government has to much control

Sarah (not verified)    June 12, 2025 - 8:00AM

I own a 2005 GMC Sierra 1500 with the good old reliable 5.3L engine before they decided to get fancy with AFM (active fuel management-cylinder cancellation) and the tried-and-true 4L60E transmission. I also help out at an auto shop that's been around since 1958. Whenever I think it's time I should get a new truck, I also think I need to keep one this running as long as I can. Because we've seen the failures of collapsed lifters and worn cam shafts that come with AFM. And we've seen the failures of transmissions in newer trucks. R&D is supposed to be a lot more R before you get to D. It's like the engineers designing the new components have no foresight... Like zero. For instance, on paper AFM is GREAT! Practical application, however, is a different matter. You're only supposed to need spark plugs every 70,000 miles, not a whole new drive train. (Also c'mon engineers, give mechanics a break. It should not take 5ish hours to replace an alternator (Buick Encore)-do better)

Hugh (not verified)    June 12, 2025 - 8:34AM

Shouldn't torquenews include problems with newer 10-speed Duramax power plants? Go to some of the truck owner websites to discover 6.6L Turbo issues - where, while pulling even just a moderate 5th wheel load - you'll end up on the side of the road as the intercooler pipe blows apart. Service tech response? "Yeah, we see a lot of this". Then there's class action litigation with both Ford & GM due to using Bosch's high pressure - 35k PSI injector pumps that shed metal into the engine due to epa lowering diesel fuel lubricity in the USA. Owners better know how to Install aftermarket parts & /or fuel additives to do what manufacturer's power plants ought to do by default.

Tim Hutson (not verified)    June 12, 2025 - 9:01AM

I use to think GM was the only vehicle. I would buy but not now. I have a lot of respect for Toyota they replaced frames on Tacoma. My daughter had a rav4 and was burning oil they replaced the bottom end of the motor because of a defect FREE. That to me shows they care for the buyer and their reputation. At least someone does!!!

George Plock Sr. (not verified)    June 12, 2025 - 9:13AM

I have bought 23 new GM vehicles since 1973. Five of them were trucks. My 2013 1500 was my fist lemon. Bought one more truck and an SUV. Disappointed in both. The Eqanox blew a head gasket at 65k miles. I had it with GM. Last August bought a VW. I was always criticizing people who bought foreign especially Jap cars.